Self-propelled Vertical Lift Used In The Warehouse For Order Picking
Cathaylift self-propelled vertical mast lift is divided into two models the single mast and double mast, the maximum lifting height can reach 9m. Due to its extremely small size and compact body, it can easily enter many places that have space restrictions but require high-altitude operations. Let me share with you a piece of customer feedback from the CR-6 model single mast. This customer needs a lot of order picker equipment due to the needs of the warehouse, but because the ordinary self prolled order picker cannot meet the work height requirements, we ask him We recommend our CR-6, the maximum working height is 8m, and the load can reach 150kg. After the customer ordered one for testing the actual effect, he gave us feedback on videos and pictures. Customers are especially satisfied that our products have a turning radius of 0mm, which can realize free turning in the middle of the shelf, which greatly saves work efficiency. Since the customer's project needs more of this equipment, he recently ordered more units. Thank you very much for the support and trust of the customer.
Shandong Cathay Machinery Co., Ltd would like to introduce the details of our CR series products, We hope this product can provide good help for your aerial work project:
● The walking motor consists of 2 built-in front-wheel motors, a lifting motor of 2.2KW, an operating voltage of 24VDC, a charging voltage of 220VAC, and two 100AH batteries on board the vehicle.
● Two high-elastic rubber gray tires, front and rear, with a diameter of 305mm and a width of 100mm.
● The telescopic guardrail can extend 480mm longitudinally.
● Hydraulically controlled front-wheel steering, front-wheel electric drive, power 0.5KW*2
● It has the function of detecting load, which can not be raised beyond the rated load, and has a light warning (this function is automatically closed after the platform is lifted by 200 or 400mm)
● Organic machine tilts sensing function: After the platform rises to 2 meters when the ground tilt is greater than 2 degrees, the sensor sends a signal, and it can only be lowered at this time. When the platform height drops below 2 meters, other functions are restored.
● Pothole protection function: The pothole protection has a sensor switch. When the pothole protection is not fully opened, the platform will automatically stop when it rises to a height of 2 meters and cannot be raised.
● After the platform is lifted and lowered to a height of 2 meters, it will stop by itself. You need to release the handle to re-operate to descend. This is an anti-pinch hand
● Set buzzer, strobe light, horn, emergency drop cable, and waterproof charging plug
● Control panel functions:
1. Lower control panel-charging power indicator, charging status indicator, key switch (upward control for upper left, off for level, lower control for lower left), emergency stop button, toggle switch for up or down, power indicator 3. Use the time meter.
2. The upper control is the coordinated control of the handle and buttons-you can operate the handle to increase, decrease, turn, set the machine parameters, etc.
The turning radius of the front-wheel drive is relatively small, and you can turn 360 degrees. The main product in the market is rear-wheel drive. If it is rear-wheel drive, it will have uneven gravity distribution, because the motor of the driving wheel, including aluminum alloy and counterweight, are on the rear side.
All the accessories of the product are basically used (Dingli). The battery is fully charged once, and it can walk nine kilometers under a full load. Then, it can be lifted 73 times and can work continuously for five hours.
For more information about the self-propelled vertical mast lift, welcome to contact us.
Shandong Cathay Machinery Co., Ltd
www.cathaylift.com
Email:sales@cathaylift.com
